• list_bg

What is the replacement method for roller shutter screens?

If the roller shutter screen on the door and window frames experiences deformation of the screen mesh, aging of accessories, and failure to retract, a new upper and lower roller shutter screen window needs to be replaced. Find a professional craftsman to come and measure the size of the rolling shutter screen window, and use a simple method of self measurement to measure the size of the old screen window.

After the new roller shutter screen is completed, remove the old roller shutter screen from the original window frame, remove the screws and locks on the frame surface, and wipe the dust on the frame surface with a cloth.

Fix the roller shutter screen box, place the screen box parallel to the door and window frames and look horizontally with a line of sight. The fixing hole inside the cover plug of the screen box needs to be drilled through with an electric drill, and the screen box needs to be tightened with screws. The positioning holes of the locking plates on both sides of the track should be perpendicular to the fixing holes of the yarn box. After fastening the clips, install the tracks on both sides.

After embedding the connection between the upper end of the track and the gauze box and cover, apply it to the lock buckle and lightly pat it to achieve the fastening effect. The right track material should be operated in the same way.

The fixing holes in the rail plugs on both sides also need to be drilled and nailed. Before nailing, it is necessary to ensure that the gap between the pulling beam material and the downward movement is about one millimeter. Then, the opening and closing hook material is buckled, and the screen window can be easily pulled up and down to hang the switch.

asdzxc1


Post time: May-08-2023